Audi pre sense malfunction is a warning that the car’s collision warning and automatic braking may not work. The car still drives and brakes normally, so you can keep driving with a longer gap. If the message stays after a restart, have every control module scanned.
The message does not name the cause. Audi has issued at least 14 service bulletins on pre sense messages, and 11 need no new part. The causes include cluster software, a seat belt left buckled and mismatched tyres.
This guide is built on Audi’s owner’s manuals, those 14 bulletins and one recall. It also draws on 72 owner complaints filed with NHTSA, the US vehicle safety regulator.
Can You Drive With an Audi Pre Sense Malfunction?
Yes, you can drive with an Audi pre sense malfunction, because it concerns a driver aid, not the brakes. Until it is fixed, though, the car may not warn you of a collision or brake for you. So leave a longer gap and stay alert.
Treat the message as more urgent in three cases:
- An ABS or ESC light is on as well. Then the stability system has a fault too, so drive gently and have the car scanned soon.
- “Passenger airbag off” shows while an adult sits in the front seat. Then that airbag may not fire, so move the passenger to the back.
- The car brakes or tightens the belts when nothing is in the way. If that happens, note the date and book a dealer visit.
If the dash shows “Drive system: malfunction” instead, that is an engine warning. The Audi drive system malfunction guide covers it.
Why Does My Audi Pre Sense Randomly Go Off?
Audi pre sense goes off with nothing in the way when it wrongly judges that a crash is likely. That is a different problem from the malfunction message. Of the 72 owner complaints, 43 describe it, and nine of those concern the 2024 Q5.
Left turns across traffic come up in nine of those reports. Also, dealers often cannot reproduce the fault on a test drive.
Still, Audi gives dealers a test for 2017 to 2025 models. It lists every pre sense action in the three days before and after a date you name. So write down the date and time when it happens, then give them to the dealer. Volkswagen’s version of the system, Front Assist, draws the same complaint. Our guide to VW Atlas problems covers what VW tells dealers to check.
What Does Audi Pre Sense Malfunction Mean?
Audi pre sense malfunction means Audi’s crash protection system has a fault in itself or a part it uses. When it detects a likely crash, pre sense warns you, tightens the seat belts, closes the windows and can brake.
It relies on the front radar, the windscreen camera, the wheel speed sensors and the airbag computer. So a fault in any of them can switch it off.
The exact wording varies by model and year. “Malfunction! Please contact Service”, “fault” and “system fault” all mean a sensor may have failed. If the message stays on, have it repaired soon.
“Currently restricted” alone means pre sense is limited, for example because stability control is switched off. If it adds “See owner’s manual”, a system it depends on, such as stability control, has failed for now. If it adds “Sensor view restricted”, dirt, snow, leaves or spray block the radar, so clean it.
“Emergency braking system off” means pre sense was switched off in the infotainment menu, or it is unavailable.
After you start the car, a pre sense light for about 20 seconds is normal. The sensors are starting up, and on some models the light stays until the car moves. Audi tells its dealers not to repair this.
What Causes Audi Pre Sense Malfunction?
Audi pre sense malfunction has ten known causes, and most of them need no new part. They are listed in the order to check them.
- Dirt, snow or ice blocking the radar or camera
- Stability control or pre sense switched off
- Driver’s seat belt left buckled between drives
- Mismatched or unevenly worn tyres
- Outdated instrument cluster software
- A fault logged in error by the radar or driver assist module
- Front camera not recalibrated after a windscreen replacement
- Failed passenger seat occupancy sensor
- Failed front seat belt tensioner module
- Blocked rear radar or damaged rear bumper wiring
You can check the first four yourself. The rest need a workshop, but only the last three involve a repair.

The seat belt cause is the least obvious, and it affects many 2019 to 2025 Audis. If the driver’s belt stays buckled across five drives, the airbag computer logs code B101C07. The car then suspects that a dummy buckle is in use.
Which Audi Models Are Affected?
Audi has documented pre sense faults on most of its models from 2015 to 2025, each with its own fix:
- A3 family (2015 to 2020): a failed passenger seat sensor, often with “Passenger airbag off”. A recall fixes it free.
- A3 (2022) and Q3 with the digital cluster (2022): the message flashes at start-up. A software update fixes it.
- Q3 (2019 to 2020, and early 2021 cars): a failed seat belt tensioner module, codes B130404 to B130555. So the dealer replaces that front belt.
- Q3 (2021 to 2025): the radar logs code B200FF0 in error, with “Distance warning: currently unavailable”. So the dealer clears it.
- A4 (2017 to 2023), A5 and Q5 (2018 to 2023) and Q7 (2017 to 2020): mismatched tyres set “currently restricted”.
- Q5 and SQ5 (2018): foam behind the rear bumper blocks the rear radar, codes C1114F0 and C1114F3. New brackets and foam go in.
- Q4 e-tron (2022 to 2024): damaged wiring behind the right of the rear bumper, codes U104500, U10BA00 or U160F00.
- A6, A7, A8, Q7, Q8, e-tron and e-tron GT (2019 to 2025, by model): the message clears after a restart. The module logged B200FF9 or C12D5FA in error.
For B200FF0, B200FF9 and C12D5FA, Audi tells dealers to delete the code and replace nothing. A new part will not cure the fault, so question any quote for one. The Sources list gives Audi’s bulletin number for each model.
Recall 21V-198 covers most 2015 to 2020 A3, S3 and RS 3 models in the US. Dealers fit a new seat sensor mat and update its module, free of charge. Before the recall, two owners were quoted about $1,200, so check your VIN first.
How to Fix an Audi Pre Sense Malfunction
You fix an Audi pre sense malfunction by ruling out the simple causes, then reading every module’s fault codes.

- Park safely, switch the ignition off, then restart. If the message goes away, a fault code is often still stored.
- Note every other warning on the screen, such as cruise control, adaptive light, airbag or seat belt.
- Clean the front radar sensor and the windscreen in front of the camera.
- Check that all four tyres match and are worn about evenly.
- Do one full drive with the belt fastened after you sit and released before you get out.
- Scan every control module, not only the engine.
- Check your VIN for open recalls at nhtsa.gov/recalls, or on GOV.UK in Britain.
- Give the dealer the codes, then ask whether Audi has a documented fix for them.
If the scan shows U112300 in the camera or radar, another module sent it a faulty value. The U112300 guide explains how to find that module.
How to Fix Audi Pre Sense Currently Restricted
To fix Audi pre sense currently restricted, first check that pre sense and stability control are both switched on. Then clean the radar sensor and the windscreen in front of the camera, and check the tyres.
Tyres matter because pre sense compares all four wheel speeds. So different sizes or uneven tread can set “currently restricted” with no fault code. If the tyre pressure warning light is on too, start with the tyres.
How Do I Reset the Pre Sense Warning Light in My Audi?
You reset the pre sense warning light in an Audi by fixing the fault, because there is no reset button. The light goes out once the fault is gone, and a scanner can clear a stored code. If the fault is still present, though, the light comes back.
When to Visit a Mechanic or a Dealer
Visit an Audi dealer if the car is under warranty or has an open recall, because the fix is free. A dealer also has the tools for software updates, camera or radar calibration and Audi’s unexpected braking test.
Out of warranty, an independent Audi specialist can read every module’s codes and fit parts, such as a seat belt. But software updates and calibration need special software and equipment, so ask before you book.
At home, a scanner that reads every module shows the pre sense codes before you pay anyone. Those codes sit in the radar, camera, airbag and driver assist modules, so an engine-only reader will not see them. Our guide on how to use an OBD2 scanner explains a full scan.
The two adapters I use on my own cars
Vgate iCar Pro BLE 4.0 with the Car Scanner app. Reads the engine’s fault codes and freeze frame on any OBD2 car. It does not reach the other control modules.
OBDeleven. Works on Audi and the other VW Group brands. On the free plan it reads and clears faults in every module it can reach. On my Skoda Rapid it reached six.
As an Amazon Associate and OBDeleven affiliate, TheCarLane earns from qualifying purchases.
How Much Does a Pre Sense Repair Cost?
A pre sense repair costs nothing when the fix is a software update or a cleared code under warranty. The US new car warranty runs four years or 50,000 miles. In the UK, it runs three years or 60,000 miles.
Outside warranty, these are the quotes that owners reported to the US vehicle safety regulator.
| Dealer quote | Amount | Reported |
|---|---|---|
| Diagnostic scan | $400 | 2026 |
| A3 passenger seat sensor | About $1,200 | 2020 and 2021 |
| Pre sense after a new windscreen | $1,700 | 2019 |
| Radar realignment or repair | About $4,000 | 2023 and 2026 |
These are single quotes and not list prices. So before you accept one, check the recall, your warranty and Audi’s documented fix for your model.
FAQs
Yes, Audi pre sense can brake the car on its own, partly or fully, to lower the impact speed. It can also give a short brake jolt as a warning.
Audi pre sense uses a camera behind the windscreen and a front radar sensor. Cars with pre sense rear also have radar sensors at the rear corners.
You turn off Audi pre sense in the MMI, and your owner’s manual gives the menu path. Owners report that it switches back on at the next start.
It can, because the front camera sits behind the windscreen (windshield). One 2017 A4 owner lost pre sense after a new one. So ask the fitter whether the camera will be recalibrated.
No US recall found for this guide names pre sense itself. But recall 21V-198 covers the A3’s passenger seat sensor, so check your VIN.
Sources
- Audi owner’s manuals: 2016 A3, UK; 2017 A3, UK; 2017 Q7, US, messages and switching off
- Audi USA, pre sense
- Audi bulletins, false alarms: 2067440, 2022 A3; 2067266, 2022 Q3; 2068008, Q3; 2072619 and 2055906, code B200FF9; 2071958 and 2076396, code C12D5FA
- Audi bulletins, checks: 2056421, seat belt; 2059863, tyres; 2059891, start-up symbol; 2074149, Q3 workshop test
- Audi bulletins, repairs: 2059944, Q3; 2048470, Q5; 2074670, Q4 e-tron
- Audi bulletins, unexpected braking: 2058077; 2069662, A3 and Q4 e-tron
- NHTSA recall 21V-198, Audi number 69BY
- NHTSA complaints database: 72 naming Audi pre sense, counted 14 November 2026
- Warranty terms: Audi USA; Audi UK
- Radar sensor photo: Nozilla, Wikimedia Commons, CC BY-SA 3.0
- Windscreen camera photo: rudefix.dk, Wikimedia Commons, CC BY-SA 4.0
Last Updated: November 2026

Founder of TheCarLane | Automotive Enthusiast
Ayush shares practical automotive knowledge based on real-world ownership and hands-on experience. His work focuses on diagnostics, engine systems, common car problems, and clear explanations that help everyday drivers understand their vehicles better.

